Pumps/Inflation

A lightweight and efficient mini pump with a locking T-handle for improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 121g

A lightweight and efficient mini pump with a low-profile pressure gauge. T-handle provides improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - In-line pressure gauge is accurate to within +/- 2 PSI. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 142g

Efficient mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm 6063-T6 aluminum barrel. - 32mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with alloy cap and alloy locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 268mm total length. - 110 PSI Maximum pressure. - Weight: 125g

The ultimate pump that should be in every cyclists garage. Air stroke volume is optimized for high pressure but is great for general bicycle use as well. Inflation needles optimize potential non-bike uses. - Stable (240mm x 130mm) fiber composite base - 520mm steel barrel with high strength steel pump shaft - Dual compound premium handle - 110cm premium quality hose - Headrush dual valve connector with alloy valve caps - Precision 51mm mid-mounted gauge - Headrush connector instantly fits Presta or Schrader valves - inflation needles included - 160 PSI Maximum pressure, suitable for all bicycle types, but ideal for 60- 160 PSI tires - 1210g

A lightweight workhorse pump. Perfect for family use in the garage or to throw in the back of the car. Inflation needles optimize potential non-bike uses. - Stable (235mm x 120mm) fiber composite base - 480mm Fiber composite barrel and pump shaft - Fiber composite handle - 85cm premium quality hose - Precision 51mm mid-mounted gauge - Headrush dual connector instantly fits Presta or Schrader valves - Inflation needles included - 120 PSI Maximum pressure, suitable for most bicycle types - 750g

A durable and accurate shock pump. - Lightweight 6063-T6 aluminum construction. - 300 PSI maximum pressure. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided hose ensures long-term durability. - Bleed valve for fine-tuning pressure. - 365mm total length. - 185g

A dual-purpose suspension fork/rear shock pump with a unique dual-pressure gauge design to facilitate fine-tuning of the unique air pressure requirements for each shock. Eliminates the need for 2 shock pumps. - Lightweight 6063-T6 aluminum construction. - Dual-face gauge ensures accurate pressure for rear (300 psi) or front (110 PSI) shocks. - Accurate to +/- 2 PSI. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided extended hose, for repeated use, and long-term durability. - Bleed valve for fine-tuning pressure. - 383mm total length. - 194g

A clever track pump that's optimized to work with both low-pressure/high volume (mtb) and also low-volume/high-pressure (road) scenarios - Ingenious dual-stage gauge provides large-scale, high-resolution 0.5PSI-accuracy from 0-30PSI, before converting to regular, lower resolution scale for the remaining 30-160PSI - A must have for any multi-bike household - Stable Steel base & barrel body with a high-strength steel pump shaft and 100cm premium quality hose - Headrush dual-valve connector is compatible with both Schrader and Presta valves without disassembly and built-in bleed valve allows for easy adjustments - Easy view 3 dual-stage gauge - 160PSI maximum pressure - Weight: 1730g

Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

Crank Brothers Klic HP sports a revolutionary design that has a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-pressure portable hand pump with hidden magnetic hose - Premium pump with flexible rubber hose to allow for easy inflation. - Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HP (high pressure) version recommended for tires 45c and narrower. - All Klic pumps come with a bottle cage bracket mount. - Length 220mm - Pressure 120psi / 8.3bar - Weight: 115 grams

Crank Brother's Klic HV features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-volume portable hand pump with hidden magnetic hose - Premium pump with flexible rubber hose to allow for easy inflation. - Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HV (high volume) version recommended for tires 1.8” wide and larger. - All Klic pumps come with a bottle cage bracket mount. - Length: 220mm - Pressure 110psi / 7.6bar - Weight: 124 grams

Crank Brothers Klic HP Gauge sports a revolutionary design with a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-pressure portable hand pump with hidden magnetic hose and pressure gauge - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! - Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HP (high pressure) version recommended for tires 45c and narrower. - All Klic pumps come with a bottle cage bracket mount. - Length 260mm - Pressure 120psi / 8.3bar - Weight: 142 grams

Crank Brothers' Gem Floor Pump overs versatility and simplicity in an easy-to-use floor pump. What else do you need? - Foot activated high pressure / high volume switch - Wide stamped steel base for easy pumping - Corrosion resistant aluminum body - Presta /Schrader convertible head - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge

The high-pressure portable hand pump with hidden hose, pressure gauge, and co2 inflator. Details - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include a concealed co2 inflator (Presta only), air pressure gauge, magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - Hp (high pressure) version recommended for tires 45c and narrower - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 120psi/8.3bar - Warranty: 5 years - Weight: 170g

The high-volume portable hand pump with hidden magnetic hose, pressure gauge, and co2 inflator. Details - Flexible rubber hose hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include an air pressure gauge, concealed co2 inflator head (Presta only), magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - HV (high volume) version recommended for tires 1.8" wide and larger - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 110psi/7.6bar - Warranty: 5 years - Weight: 186g

- 1.5'' pressure gauge - DualHead head fits Schrader / Presta - Bleed valve - 160 psi maximum pressure

- Aluminum barrel - Aluminum lever and valve cap - Inline gauge - SoftGrip handle - Reversible valve for Schrader/Presta - 100 psi - Ultra Compact 7.5" length (190mm) - Includes frame mount bracket, screws, and optional strap

- Telescoping for high-pressure or high-volume - Aluminum barrel - Aluminum lever and valve cap - SoftGrip handle - Reversible valve for Schrader/Presta - 80psi-HV/120psi-HP - Ultra compact 7.5" length (190mm) - Includes frame mount bracket, screws, and optional strap

- Includes 2-20g CO2 Cartridges - Compact and lightweight for easy carry - Threaded storage port allows you to attach a CO2 cartridge without puncturing the seal - Screw-on valve holds securely and is compatible with Presta/Schrader - Rubber dust cap protects the valve port Specifications: - Cartridge Type: Threaded - Cartridge weight: 20g - Valve: Presta, Schrader

Evo's Hurricane Floor Pump w/Gauge uses a time-saving head that automatically adjusts to Presta or Schrader valves. The gauge lets you dial in exactly the PSI you want. It's made with a heavy-duty aluminum body with a comfy rubber handle.

- Dual purpose pump with high-pressure mode for shock inflation and high-volume mode for tire inflation - Aluminum barrel - 1.5" gauge is rubber coated for impact protection - 1-2PSI micro adjust button - Includes Presta adaptor for tire inflation - Soft grip handle - Compact 10" (254mm) length makes this easy to take on every ride - Includes frame mount bracket, screws, and optional strap

The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

Rebuild seal kit for the Lezyne HP Floor Drives (CNC, Alloy, Classic, Steel, Sport). Kit includes a replacement swivel and a piston seal o-ring.

- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps - Sold as a pair

Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.

Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.

For all of the following models: - Carbon Drive - Alloy Drive - Tech Drive HV - HV Drive - Sport Drive HV - Micro Floor Drive HV - Micro Floor Drive HVG - Swivel Drive HV

A rebuild seal kit for the following Lezyne hand pumps: - Road Drive - Carbon Road Drive

Lezyne's Speed Chuck is the fastest way to air up your aero disc wheels. It's made from Composite Matrix and is designed to fit Presta valves on deep-dish carbon disc wheels.

Lezyne Pump Parts

Replacement CNC-machined aluminum pump mount for all Road Drive and Carbon Road Drive pumps. Includes Velcro pump strap.

Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.

160 PSI replacement analog pressure gauge for all standard travel floor pumps; includes glue and O-ring. With a 1.5-inch face, this gauge increases visibility and allows a precise measurement of tire pressure.

- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps

- Replacement ABS Flex Hose for all Pocket Drive pumps - Presta & Schrader compatible

220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.

Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

20g CO2 cartridges contain a mid-sized charge suitable for higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").

Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.

- Nylon braided hose includes an ABS1 Pro chuck - Compatible with all high-pressure floor pumps.

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)

A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

A compact, lightweight hand pump with an efficient, overlapping Composite Matrix handle, the HP Drive features a CNC-machined aluminum barrel and piston and is optimized for high-pressure applications. It's quipped with our ABS Flex hose which is both Presta and Schrader valve compatible. Includes Composite Matrix frame mount.

A compact, lightweight hand pump with an efficient, overlapping Composite Matrix handle, the HP Drive features a CNC-machined aluminum barrel and piston and is optimized for high-pressure applications. It's quipped with our ABS Flex hose which is both Presta and Schrader valve compatible. Includes Composite Matrix frame mount.

Floor pump nylon braided hose with an included ABS1 Pro chuck, compatible with the Pressure Overdrive and Digital Pressure Overdrive.

Compact and super efficient high pressure bicycle hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, providing superior durability, minimal weight and all of the style. The integrated ABS Flex Hose is presta and shrader valve compatible, and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 120 PSI (8.3 BAR) of pumping power, the Grip Drive HP is excellent for all high-pressure bicycle tire applications. - 230 mm, 105g - 120 psi, 8.3 bar. - Grip Textured CNC machined aluminum construction with compact overlapping handle. - Presta and Schrader valve compatible ABS Flex Hose. - Includes Composite Matrix frame mount

Compact and super-efficient high-volume bike hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, with superior durability, minimal weight, and all of the style. The integrated ABS Flex Hose is Presta and Schrader valve compatible and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 90 PSI (6.2 BAR) of pumping power, the Grip Drive HV is excellent for all-mountain bikes and gravel bikes. Includes a lightweight Composite Matrix frame mount. - Max pressure: 90 PSI | 6.2 BAR - Small: 186mm | 119g - Medium: 231mm | 134g

A compact, lightweight hand pump with an efficient, overlapping Composite Matrix handle, the HV Drive features a CNC-machined aluminum barrel and piston and is optimized for high volume applications. It's quipped with our ABS Flex hose which is both Presta and Schrader valve compatible. Includes Composite Matrix frame mount.

A compact, lightweight hand pump with an efficient, overlapping Composite Matrix handle, the HV Drive features a CNC-machined aluminum barrel and piston and is optimized for high volume applications. It's quipped with our ABS Flex hose which is both Presta and Schrader valve compatible. Includes Composite Matrix frame mount.

Lezyne's convenient Twin Kit includes their Twin Speed Drive CO2 inflator, two CO2 cartridges, a couple tire levers and a Velcro strap to keep it all together. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.

Lezyne's lightweight and powerful Tech Drive HP mini-pump quickly inflates your tires so you can get back on your bike. Its CNC'd aluminum barrel and overlapping handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.

- Pocket size - CNC machined aluminum - Compact highly efficient overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes integrated valve core tool - Aluminum mounting bracket - 140mm/160psi - 160 PSI / 11 BAR - Length 140mm - Weight 98g - Loaded includes twin speed drive CO2 head, 20g CO2 cartridge and lever kit