Car Racks

The EVOC TAILGATE PAD fixes your bikes safely and protects the tailboard of your pick-up truck from scratches when loading. Completely redesigned for 2018, the Tailgate Pad now features foam pads also on the back of the tailgate to better protect the bike's downtube. - Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Improved rear view camera compatibility - Fleece lining on truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - ML fits tailgates 130cm/50'' wide and XL fits tailgates 160cm/60'' wide

Designed for safe transport of up to two bikes on your pickup. Securely mount your bikes while protecting your tailgate from damage. Ideal for MTBs Specifications 770g, 83 x 57 x 2cm We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame.

Chainstraps for a multitude of rear of car bike racks.

Make pit stops on your bike excursion without worry of losing your rides. This security cable keeps your bikes and mast-style hitch mount locked to your vehicle. Cable stows in arm of rack when not in use. Compatible with the DoubleDown and BigHorn. - Lock your bikes and your hitch-mount bike rack to your vehicle - Compatible with the Yakima DoubleDown and BigHorn - Integrated cable lock secures outside bike to the mount - Cable stows in the arm of the rack when not in use - HitchLock secures the rack to your vehicle - Includes 2 SKS Lock Cores so your HitchLock and locking cable will use the same key Product Specs: - Weight: 0.50 lbs. - Dimensions: L 7.00 in x W 4.00 in x H 2.00 in - Limited Lifetime Warranty

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded

The Swagman | E-Spec can be used on a 2" hitch receiver and is capable of carrying two bikes with a weight capacity of 70lbs. per bike anywhere! The E-SPEC comes with locking ratchet hooks and locking hitch pin to keep your prized possessions safe. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 2 eBikes with a maximum weight capacity of 70lbs per bike - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - When being used on a car, truck or SUV it can be folded up - When being used on an RV or Motorhome, the provided RV Bolt is required - Locking Threaded Hitch Pin - Rack Weight: 63lbs

Swagman's Original 4 is an easy-to-use, sturdy single-arm hitch rack at a great price. Sturdy steel construction ensures durability and long life. Loading and unloading bikes is easy thanks to Swagman's protective and secure rubber-lined and knob-tightened cradles that adjust to safely hold up to four bicycles by their frames.

The Straddler gives Travel Trailer owners the ability to mount a bike rack on the nose of their travel trailer. This innovative rack will clamp onto the triangular frame, telescoping and rotating legs allow for fitting to a variety of trailer designs with the capability of rising over even 30lb LP Tanks. - Fits: Most travel trailer "A" frames - Max load: 35 pounds/bike + bike rack (max 100 pounds including bike rack) - Fit: Designed to create a 2” receiver

Swagman's Trailhead 4 rack is an easy-to-use, sturdy double-arm hitch rack featuring quality steel construction for durability and long life. Swagman's protective anti-sway cradles quickly and easily adjust to safely hold up to four bicycles and prevent bike-to-bike contact. The arms easily fold down when not in use, and the rack tilts forward so you can access the rear of your vehicle.

Swagman's Cross-Country Rack transports 2 bikes safely and securely, so it's always quick and easy to bring your bikes along! Place your bike in the wheel holders, adjust the ratcheting arm, strap the wheels down, and go. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and folds down so you can access your vehicle.

Swagman's Cross-Country Rack makes it easy to transport up to 4 bikes. Simply lift a bike into the wheel holders, secure the ratcheting arm over the frame, and strap in the wheels. The trays can be adjusted to offset the bikes for a convenient fit. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and the rack's center arm folds down so you can access your vehicle.

The BackStage is the first platform rack that offers full access to the rear of the vehicle. Either empty or with one or two bikes loaded, the rack can be swung to the passenger side for full access to the rear of the car. Perfect for camping, #vanlife, dog owners or anyone that needs full access to the back of the car. RockyMounts tested on RVs, Sprinters, and Chevy Suburbans — the cantilevered arm swings out 41" so it works with all cars and trucks. - Fits tires up to 5.0”, bikes up to 48” wheelbase, wheel diameter 20”-29” - 3” of side-to-side tray adjustment avoids seat to handlebar interference - 13” spacing between bikes allows clearance for all fat bikes, including those with Bluto forks and 197mm rear spacing - 50lb max weight per bike with Add On (150lb max) - No bike frame contact - Compatible with MonoRail Swing and 2” MonoRail - Lifetime warranty

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

EXCLUSIVE to Velo Bike Ski Trail, The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Rack weight 39 lbs

The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier

If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

The TAILGATE PAD DUO is a solution for safe pickup-truck bike transport: it fixes your bikes safely and protects your truck´s tailgate from damage. - Allows the secure transport of two bikes - Improved padding to protect the frame - Needs to be fastened to both sides of the tailgate door

Coupler for 1-7/8 " balls for RACKandROLL trailer.

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.