Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

e*thirteen by The Hive Chain Guide Dual-Step Roller Kit
$23.99
- Service parts for E-13 chainguides - Includes dual step roller, bearing, axle and spacer
e*thirteen by The Hive XCX Chain Guide
$79.99 - $149.99
- XC or Cyclocross top guide, ideal for 1x drivetrains - ST and CX guides mount to 28.6, 31.8 and 34.9 seat tubes - E-Type guides fit Shimano E-Type and SRAM S3 frame mount standards
Zipp Tangente Cork Brake Pads
$52.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$37.99
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$39.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$40.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. Derailleur Hanger 19
$43.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 201
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 284
$44.99
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 368
$52.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Santa Cruz Part #23-18684 - Fits Santa Cruz frames with 12 x 148mm thru axles only - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 6
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. PF30 Fat Bike ABEC-3 Bottom Bracket
$91.99
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g
Wheels Manufacturing Inc. PressFit 30 Bottom Bracket Sealed Bearings
$106.99
Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!
Wheels Manufacturing Inc. Threaded To 30mm Angular Contact Bottom Bracket
$124.99
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 100g
TruVativ BMX To Threaded (BSA) BB Adapter
$25.99
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
TruVativ Giga Pipe Team DH Bottom Bracket
$79.00 - $89.99
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
TruVativ Holzfeller Stem
$84.99 - $94.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
TruVativ Howitzer Team Bottom Bracket
$81.99
TruVativ's Howitzer Team Bottom Bracket is THE workhorse built for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.
TruVativ Howitzer XR Bottom Bracket
$62.99
TruVativ's Howitzer XR Bottom Bracket is built tough for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$19.99
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Tacx Stainless Steel Jockey Wheels, Shimano/Campagnolo
$29.99
These jockey wheels use durable stainless steel ball bearings to improve drivetrain performance. They are ideal for cycling in the rain, or for demanding conditions such as mountain biking or cyclocross. They are lubricated with grease and maintenance-free.
TRP RRL Carbon Brake Levers
$124.99
- Non-Integrated brake levers for Urban, Singlespeed, Cross, Tri and TT use - Ergonomic carbon fiber lever with grippy, textured rubber hoods - Includes spring loaded push button cable tension quick release. Sold in pairs
Specialized BG Comfort Gel Saddle
$60.00
The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue. - Plush foam combined with gel inserts delivers unmatched comfort. - Anatomically designed Body Geometry groove improves blood flow and comfort. - Vacuum formed construction creates a durable and waterproof saddle. - Level 5 padding: Ideal for commuting and casual riding - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
Specialized BG Contour Locking Grips
$30.00
Specialized's BG Contour Locking Grips are medically designed with an ergonomic shape that offers excellent support and protection, while the soft-density outers provide an outstanding grip and superb comfort. Available in two sizes for a perfect fit, the Contours also include locking clamps to keep them in place on your handlebars.
Specialized Enduro Grip
$15.00
Our Enduro Grips are designed to outperform the rigors of all mountain and enduro riding. That's why they feature a thicker degree of padding and a non-slip texture for enhanced shock absorption and lasting comfort. Not stopping there, we amplified these characteristics via a dual-density compound. As we mentioned, the inner core is thicker than your average grip in order to deal with shock, while the outer part has a softer density to better absorb vibrations. And to put the "grip" into these grips, we also gave them a textured pattern for no-slip performance on the trail. Put it all together, and you're looking at grips that are going to leave your hands comfortable and fresh over your whole ride. - Softer density on the outside for superior vibration damping. - Dual-density compound for improved comfort and bar adherence. - Softer, thicker padding for heightened comfort. - Higher-density inner core for secure bar attachment. - Textured pattern provides non-slip performance. - Diameter: 30mm
Specialized Enduro XL Locking Grips
$25.00 - $30.00
Specialized's Enduro XL Locking Grips boast an oversize diameter for maximum control in even the most challenging situations. Their soft-density, textured outers provide an outstanding grip and superb comfort, while the firm inners and locking clamps built into the ends keep the grips securely in place on your handlebars.
Specialized Milano Gel
$60.00
A generous amount of padding with a performance-oriented profile makes the Specialized Milano Gel saddle a perfect perch, whether it be a moderate fitness ride or a casual cruise on the bike path. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Soft foam combined with gel inserts delivers unmatched comfort. - Reflective coating on the rear of the saddle for better visibility from headlights of upcoming motorized vehicles. - Vacuum formed construction creates a durable and waterproof saddle. - Level 4 padding: Ideal for fitness and commuting without the need for chamois padding. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 175mm / Weight 443g
Specialized P.Series Platform Pedals
$24.99
For a sure grip and premium control, put Specialized's P.Series Platform Pedals on your favorite ride. They're made of a rugged nylon and boast durable chromoly axles so they're light and built to last.
Specialized P.Series Sprocket
$44.99
Add some style to your park bike with Specialize's P.Series Sprocket. CNC'd from light and strong 6061 aluminum, this sprocket helps you crank hard for that next kicker or drive into the next berm. It's for 19mm x 48-spline spindles.
Specialized Phenom w/Mimic Comp Saddle Women's
$125.00
For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
Page 1 of 10 Next page